Vantec SATA 150 PCI RAID Card Bedienungsanleitung

6-Port SATA II 150 PCI Host Card w/RAID User Manual Model: UGT-ST310R All brand names and trademarks

UGT-ST310R Page 10 use existing hard drive(s) with data. To create a RAID 0+1 set four hard drives are required. Auto configuration (recommended) T

UGT-ST310R Page 11 6. Select chunk size from 8k, 16k, 32k, 64 or 128k, then press Enter. 7. Select the first drive, press Enter. 8. Select the seco

UGT-ST310R Page 12 Enter. 3. Select RAID5, then press Enter. 4. Select the number of drives then press Enter. 5. Select Auto configuration, then pr

UGT-ST310R Page 13 and reboot. 15. Continue with FDISK and FORMAT steps as if you were installing a conventional hard drive. CONCATENATION (JBOD) Th

UGT-ST310R Page 14 2. Select Delete RAID Set, then press Enter. 3. Select the RAID set then press Enter. 4. When asked Are You Sure(Y/N)?, press Y

UGT-ST310R Page 15 FBIOS Configuration The 6-Port SATA II 150 PCI Host Card w/RAID BIOS will appear every time your system starts up. If the BIOS do

UGT-ST310R Page 16 Fto Windows. 2. At Found New Hardware Wizard, click Next. 3. Select Search for a suitable driver for my device (recommend) then c

UGT-ST310R Page 17 For An Existing Installation 1. Setup the RAID Array prior to driver installation and boot up to Windows. 2. At the Found New H

1. Setup the RAID Array prior to driver installation and boot up to Windows. 2. At the Found New Hardware Wizard, select No, not this time, then cli

UGT-ST310R Page 19 F To Verify Windows® Installation 1. Right click My Computer and click Manage. 3. Please insert driver CD, click Next. 4. Click

UGT-ST310R Page 2 Table of Contents 1. Bus Interface... 3 2. Connectors...

UGT-ST310R Page 20 2. Select Device Manager. 3. Double click SCSI and RAID Controller (Storage controllers), then double click Silicon Image SiI 311

UGT-ST310R Page 3 Features • Silicon Image SiI3114 SATA controller chip • Compliant with PCI Specification, Rev. 2.3, 32-bit, 33/66Mhz • Complian

System Requirements z Pentium-class computer with one available PCI slot z Windows® 2000, XP/2003 32/64bit, Vista 32/64bit Hardware Description G

UGT-ST310R Page 5 Note: There are six SATA ports in 6-Port SATA II 150 PCI Host Card w/RAID. We name these ports from A through F. Ports A to D are

UGT-ST310R Page 6 drive. 4. Attach the other end of the Serial ATA cable to the Serial ATA controller on the 6-Port SATA II 150 PCI Host Card w/RAI

UGT-ST310R Page 7 3. Select RAID0, then press Enter. 4. Select the number of drives then press Enter. 5. Select Auto configuration, then press Ente

UGT-ST310R Page 8 RAID 1 (Mirror) For New/Blank Hard Drives 1. As the BIOS boots press Ctrl+S or F4 when prompted to enter the RAID BIOS. 2. At

UGT-ST310R Page 9 9. Input the RAID size, press Enter. 10. Press Ctrl+E to exit the BIOS. 11. When asked Are you sure to exit(Y/N)?, press Y to ex