Vantec UGT-ST622 Bedienungsanleitung PDF herunterladen (Seite 7)

UGT-ST622 Page 7

G (Jumpers Settings)

JP

Description

Active Port

J1-J4

1-2 close

Enable SATA Connector A

2-3 close

Enable SATA Connector D

J5-J8

1-2 close

Enable SATA Connector B

2-3 close

Enable SATA Connector C

2.2 Hardware Installation

1. Turn off the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCIe slot.

4. To install the board, carefully align the card’s bus connector with

the selected PCIe slot on the motherboard. Push the board down

firmly.

5. Attach your internal devices to the SATA 6G PCIe Card.

6. Replace the slot bracket’s holding screw to secure the card.

7. Replace the computer cover and reconnect the power cord.

JP

Description

Active Port

J1-J4

1-2 close

Enable SATA Connector A

2-3 close

Enable SATA Connector D

J5-J8

1-2 close

Enable SATA Connector B

2-3 close

Enable SATA Connector C

1 2 3 4 5 6 7 8 9 10 11 12 13

Kommentare zu diesen Handbüchern

Keine Kommentare